Stock Status: Call For Stock(shipping delay possible)
* Please log into your account to avoid entering this information every time.
ITEM #: 9820565 Precisely measure flow rates and totals Proven design uses metal body components for added durability Accumulated flow can be logged using an optional totalizer Includes NIST-traceable certificate These flowmeters feature an advanced U-shaped sensor that ensures accurate and repeatable results. Gas flow measurements are unaffected by moderate temperature and pressure variations at the inlet. The meter also allows a four-point calibration across the flow range to improve meter linearity. Output data...
ITEM #: 9820565 Precisely measure flow rates and totals Proven design uses metal body components for added durability Accumulated flow can be logged using an optional totalizer Includes NIST-traceable certificate These flowmeters feature an advanced U-shaped sensor that ensures accurate and repeatable results. Gas flow measurements are unaffected by moderate temperature and pressure variations at the inlet. The meter also allows a four-point calibration across the flow range to improve meter linearity. Output data from the meter can be sent via a 0 to 5 VDC or 4 to 20 mA signal; an analogto- RS converter is available for data collection and analysis on your PC. All meters include a detachable 3 1/2-digit LCD that can be tilted up to 90 for easy reading. Remotely mount the display up to three feet using extension cable 32662-70. The optional totalizer 32650-22 displays accumulated flow. The meter is protected from polarity reversal or short circuit by a built-in resettable fuse. Aluminum models have wetted materials of anodized aluminum, brass, and Viton; stainless steel (SS) models have wetted materials of SS and Viton. Accuracy: These precalibrated flow controllers operate at inlet pressures between 5 and 60 psi and at gas temperatures between 59 and 77F (15 to 25C) while maintaining the stated percent full-scale accuracy and linearity. When operating beyond 5 to 60 psi, add 0.01%/psi full-scale; if operating beyond 59 to 77F (15 to 25C), add 0.15%/C full-scale. This listing is for Each.
