Stock Status: Call For Stock(shipping delay possible)
* Please log into your account to avoid entering this information every time.
ITEM #: 18832035 Larson Electronics LM-30-3S-2X1000W-240V, 2000 Watt Telescoping Light Mast - 30' 3-Stage Light Tower 2000 Watt Telescoping Light Mast - 30' 3-Stage Light Tower - 360° Rotating Boom - High Mast Lighting(-240V). Made in the USA The LM-30-3S-2X100W Metal Halide Light Tower from Larson Electronics is an 30 foot three stage extendable light tower equipped with two outdoor rated 1000 watt metal halide light fixtures producing approximately 110, 000 lumens each. The 1000 watt fixtures are wet...
ITEM #: 18832035 Larson Electronics LM-30-3S-2X1000W-240V, 2000 Watt Telescoping Light Mast - 30' 3-Stage Light Tower 2000 Watt Telescoping Light Mast - 30' 3-Stage Light Tower - 360° Rotating Boom - High Mast Lighting(-240V). Made in the USA The LM-30-3S-2X100W Metal Halide Light Tower from Larson Electronics is an 30 foot three stage extendable light tower equipped with two outdoor rated 1000 watt metal halide light fixtures producing approximately 110, 000 lumens each. The 1000 watt fixtures are wet location approved, vibration and shock resistant, and provide operators low maintenance and high output temporary lighting solution. This light tower folds over for easy transportation, features a rotating boom that allows for 360° of rotation, and a removable mast head for storing mounted equipment when not in use. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* Larson Electronicss' LM-30-3S-2X1000W telescoping steel light tower mast is designed to allow operators to quickly and safely deploy 220, 000 lumens of intense lighting in locations where this equipment must be elevated to heights up to 30 feet for effective light coverage. This light boom can be extended to 30 feet for maximum area coverage and collapsed to 14 feet for applications where a footprint smaller than 14 feet is required. The tower is constructed of square steel tubing with a lower section 14` in length and 4" in diameter by 1/8" thick, middle section 12` in length and 3" in diameter by 1/8" thick, and an upper section 8` and 2" in diameter by 1/8" thick. Each section has 2 foot of overlap. The mast is elevated using an included 1, 000 lbs hand winch with 3/16 inch cable and extended to its full height using a second 1, 000 lbs winch. This fold over light tower is equipped with two of our wet area suitable HID-22-SL-REM metal halide floodlight fixtures producing a combined total of approximately 220, 000 lumens at 2000 watts. Each fixture produces 110, 000 lumens of high intensity light while drawing only 1000 watts @8.34 amps for a combined 16.6