The outstanding line of Liquid Nails caulk products includes the high-quality, high-performance products that professionals expect. This air and water-tight, flexible, siliconized acrylic caulk provides added water resistance from silicone, extra adhesion and outstanding durability. It provides a superior seal that is ideal for window and door frames, siding and trim, baseboards and molding, and can be used on virtually all surfaces including wood, brick, stucco, aluminum, concrete, glass, and more. Paintable with oil or latex paints, it offers a 35-year durability guarantee. White and colors exceed ASTM C-834 performance requirements; clear exceeds ASTM C-920 performance requirements. VOC Compliant everywhere.
Excellent flexibility and durability
Paintable
Water cleanup
Will not crack or peel
Premium all-weather protection
Contributes to LEED Certification
Contributes toward NAHB National Green Building Standard Certification on the structure
Recommended For: window and door frames, siding and trim, stucco, plaster, electrical and utility boxes, painted surfaces, baseboards, wood, aluminum, concrete, stone, metal, moldings, brick, masonry, glass and vinyl. NOT Recommended For: applications below the waterline, aquariums, automotive uses, on top of silicone, wet or green wood and for gaps wider than 1/2". Surface Preparation-Clean and dry surface thoroughly before applying this caulk. Remove any old caulk with mineral spirits. Fill any deep joints with solid filler to within 1/2" of surface. This caulk should be applied in dry weather at temperatures above 40° F (4° C). Do not use this caulk when rain is expected within 24 hours. Cartridge Application-Load caulk cartridge into standard caulking gun. Cut nozzle at 45° angle for desired bead size (marked on nozzle). Apply continuous bead of caulk into gap at 45° angle. Smooth over with wet gloved finger or tool until level with surface. Painting Guidelines-Paintable with oil or latex paint. For best results, wait 24 hours, longer under humid conditions. Squeeze Tube Application-Knead caulk tube to soften contents. Cut tip at 45° angle where marked for desired bead size. To apply caulk, start at back end and squeeze towards nozzle. Under constant pressure, apply continuous bead of caulk into gap at 45° angle. Smooth over with wet gloved finger or tool until level with surface. Drying Time-Caulk skins over within 10 minutes. Completely dry in 72 hours. For best results, allow 24 hours before painting this caulk. Cleanup-If the caulk is wet, use water. If the caulk has dried, scrape it away.