ITEM #: 12925188
Capacity: 1000VA / 600W, Topology: Line-interactive, Wave Form: Simulated sine wave, Outlets: 8, Features:, AVR for battery-backed outlets, Surge suppression, Auto restart while AC is recovering, Off-mode charging, Power management software, Phone / fax / network combo ports, . The PowerPro is a solid line-interactive UPS with automatic voltage regulation (AVR) function to monitor and stabilize incoming voltage levels to ensure electronic devices are protected from voltage fluctuations, brief blackouts,...
ITEM #: 12925188
Capacity: 1000VA / 600W, Topology: Line-interactive, Wave Form: Simulated sine wave, Outlets: 8, Features:, AVR for battery-backed outlets, Surge suppression, Auto restart while AC is recovering, Off-mode charging, Power management software, Phone / fax / network combo ports, . The PowerPro is a solid line-interactive UPS with automatic voltage regulation (AVR) function to monitor and stabilize incoming voltage levels to ensure electronic devices are protected from voltage fluctuations, brief blackouts, transient surges, and data line noise all of which can negatively impact businesses and individuals who depend on electronic devices for optimal operation at all times. The AVR function not only protects devices against voltage fluctuations, it also extends the lifespan and maintains optimal performance of connected devices by providing more stable, consistent power. Inconsistent and unreliable power could lead to loss of revenue and downtime from data loss, offline duration, reduced efficiency, malfunction of devices, or even permanent damage to electronic devices under extreme conditions. Rest assured knowing your electronics are protected from power disturbances and battery-backed in case a power issue does arise. Utilize the included software to monitor and control UPS settings and conditions from a computer, or check the LCD for real-time status information. Typical Applications Mid-level computers Workstations Gaming consoles Home networking devices Point-of-sale devices Surveillance systems Home theater electronics Security systems VoIP / PBX systems Main Features (4) Battery-Backed Outlets with AVR Function and Surge Protection These outlets keep critical electronics online during a temporary blackout, adjust minor voltage fluctuations, and offer protection from power surges and voltage spikes. If a blackout occurs or a power disruption beyond the tolerance range is detected, the UPS will switch over to battery power and supply these outlets with power. Connect mission-critical electronics to these outlets. (4) Surge-Protected Outlets Connect non-critical equipment to these outlets to protect the equipment from power surges and voltage spikes. Automatic Voltage Regulation (AVR) Automatically boosts or bucks minor voltage irregularities instead of switching to battery backup mode. By regulating the output voltage rather than using the battery, the UPS prolongs the lifespan of your battery and protects connected equipment against spikes, surges, brownouts, minor overvoltages and under voltages, and temporary blackouts. The more boosts and bucks there are, the wider the acceptable input voltage range is, which will decrease the need to switch to battery power, therefore prolonging the lifespan of your battery. This series offers two-step boost and one-step buck AVR functions. Overload Protection Protects the UPS from an overload. If the circuit breaker trips, unplug a few electronics before resetting the circuit breaker and turning your unit back on. Smart Battery Management Maximize battery performance and lifespan with an intelligent, multi-stage battery charging system to auto-sense the optimal battery charging performance based on battery levels. Power Management Software Monitor and control the UPS from your computer with the included user-friendly software to automate computer shutdown, monitor battery levels, set UPS parameters, receive alerts of abnormalities, and more. Phone / Network / Fax Line Suppression (RJ-11/45 Ports) Protects telephone, network, or fax lines from line surges. Connect one line into the jack from the source and one line from the out jack to your phone, network, or fax line. Cold Start Capable Turn on the UPS even without utility power as long as there is sufficient battery power. Auto-Restart During AC Recovery Once power returns to normal and the battery levels are sufficient, the UPS will automatically restart. Off-Mode Charging The UPS continues charging the internal batteries when powered off as long as the unit is plugged into an AC mains wall socket. LCD Screen See real-time status information of your UPS power conditions including the voltages, battery level, fault detected, and more. Enable / Disable Audible Alarm Enable or disable the audible alert for your unit. To enable or disable the audible alarm, turn the LCD screen on first then press the button twice quickly. The UPS will beep once the alarm is enabled. The default setting for the audible alarm is enabled. If the alarm is disabled, no audible alert will be made when the UPS reaches a low battery state. Warranty (US & Canada) 3-year equipment warranty, 2-year battery warranty, and 3-year $25, 000 connected equipment warranty with product registration . See the Warranty page for additional information. WARNING: This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS) which are known to the State of California to cause cancer and birth defects or other reproductive harm. The battery in this product can exposure you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov .
Read More >>
